Top 10 Most Asked Questions about Cordless Drills (From Experts) – FAQs 2020

During our research on the best cordless drills, we noticed numerous important frequently asked questions and thought about sharing them.

So, given below are the top 10 most asked questions about cordless drills.

Top 10 Most Asked Questions about Cordless Drills

Why do I need to use a Cordless Drill?

A cordless drill is such a versatile tool. You can use it to do small tasks around the house like installing wall anchors for hanging a picture. Also, you can perform large projects like building a wooden self or a chair. A fine cordless drill allows you to handle a wide range of drill bit sizes. This can help you in different applications. Owning a cordless drill will also allow you to save money and time instead of calling in a professional driller. Plus, you can get the job done according to your satisfaction.

How to Remove Chuck in a Cordless Drill?

Do you wish to remove the chuck in your cordless drill? Then simply follow the simple steps given below:

Step 1: You will see a screw at the center of the chuck. In case you don’t see it, loosen the jaw of the chuck so that it becomes wider. Now, if the screw is visible to you, take a screwdriver and remove the screw by turning it in the clockwise direction. The chuck will be removed.

If the screw is too tight for you to remove or if there is no screw in the chuck, then follow step 2.

Step 2: You will notice a gearbox setting on your cordless drill. To reduce the gear resistance, mark this setting to the lowest number. After that, take a large Allen wrench and put it into the chuck. You will need to turn it to perfectly tighten the wrench.

The next step can be a bit dangerous. We would suggest you to be extra careful while doing this. 

Step 3: After tightening the wrench, you will need to put the drill on the workbench. The Allen wrench should lie outside and horizontal to the workbench. Take a hammer and carefully strike the wrench in the anti-clockwise direction. You will find the chuck to loosen up. Subsequently, you can remove it by hand.

How to Properly Drill a Hole Using a Cordless Drill?

To properly drill a hole using a cordless drill follow the below mentioned steps:

Top 10 Most Asked Questions about Cordless Drills

Step 1: You will need to mark the location on the material where you want the hole to be. For this, you can put the caliper along the edge of the material. Then you will need to apply pressure to the other side and lightly scrape it across the material. After marking the first line, you will need to draw another line to cross the first one. Remember that the two lines should meet at the point where you want to drill your hole.

Step 2: You will need to push down the center punch and put an indentation where your hole needs to be. The reason why you need to do this is so that the drill bit walks over the material and does not move away from its position.

Step 3: You will need to start your drill. Once the drill goes through, it creates a burr sound. That’s where you will use the countersink bit. You will just need to hit it quickly to remove the burr. You will only require one or two revolutions and then you can drill a hole as deep as you want easily.

Are Cordless Drill Batteries Interchangeable?

For this question, we have two answers: yes and no. 

Yes, cordless drill batteries are interchangeable if you have both the drill and the battery of the same brand. For example, in your 20-volt Dewalt model cordless drill you can use an 18-volt Dewalt model battery.

No, cordless drill batteries are not interchangeable if you are using the drill and the battery of two different brands. For example, you cannot use a Black & Decker battery in a Milwaukee cordless drill.

But why? Now there is a clear money making strategy behind this. All the companies make their batteries in such a way that they are only compatible with products of their own brand. This helps them to make more cash.

What is the Best Cordless Hammer Drill?

Both Makita XRH01Z 18-volt Brushless Rotary Hammer Cordless Drill and Dewalt DCD996B 20-volt Brushless Hammer Cordless Drill are the best cordless hammer drills you will find in the market. But how do you choose between these two? If you’re a little low on budget then we would suggest you to go for the Dewalt brand, otherwise you can choose the Makita brand. Other than that, we have listed below a few features of both these cordless hammer drills to help you choose the best one for yourself.

Dewalt DCD996B Brushless Hammer Cordless Drill

  • Has a 3-mode LED light with spotlight mode
  • Comes with a 360-degree side handle
  • Includes a belt hook
  • Comes with a powerful three-speed motor

Makita XRH01Z Brushless Rotary Hammer Cordless Drill

  • Made from star protection technology that protects it from over-discharging, over-heating, and overloading
  • Longer battery life
  • Prolong runtime
  • Has 3 modes of operation: rotation, hammer, both hammer and rotation

Which Cordless Drill is Best for Concrete?

We have tested many cordless drills for drilling holes in a concrete block. While some failed badly, others proved to do a better job than expected. But the best cordless drill that we found for this purpose is the Dewalt DCD985B hammer drill. This hammer drill helps you make holes in the concrete easily because of its powerful motor of 450 UWO (Units Watts Out). Such an amazingly powerful motor produces 300 inch-pounds of torque and a 3 speed all-metal transmission which aids you in breaking through concrete.

Which Cordless Drill is better: A Brushless One or a Brushed One?

This is one of the questions that most of the buyers have in mind when they want to buy a cordless drill. To give you a straight answer we would say that brushless cordless drills are preferred over brushed cordless drills. But you must be wondering why. That is because the wear and tear of the brush in brushed cordless drills generate friction. Hence, making the cordless drill hot. So, the lifetime of the drill decreases. Not only that, but it also consumes more battery. Another reason why you should not go for a brushed cordless drill is because they take the same amount of power while doing small and heavy duty jobs. While in brushless cordless drills, less power is consumed while doing small tasks and more power is consumed while doing heavy duty tasks. Consequently, you get more lifetime and battery runtime in brushless cordless drills.

Which Cordless Drill Has the Most Torque?

For the drill with the most torque, Makita XPH102 18-volt LXT lithium-in cordless drill wins the game. This drill generates 480 in-lbs of torque. Moreover, it weighs only 4.0 pounds and has a battery for reduced operator fatigue. We were not surprised to find that the motor of this drill has a dual-speed feature that is suitable for powerful drilling, driving, and hammering.

The Makita XPH102 is designed with the XPT technology which makes it dust and water resistant. Plus, you will also not find this drill to overload, over-discharge, and overheat because of the star protection technology implemented in this product.

Which Cordless Drill is the Best for Ice Auger?

Here we will mention two cordless drills that are considered the best for ice auger: Dewalt DCD996P2 20-volt lithium-ion cordless drill and Milwaukee 2704-22 M18 fuel cordless drill. When it comes to the price, the Dewalt DCD996P2 is better than Milwaukee 2704-22 M18. Other than that, we would like to leave the final choice to you provided some of the features of both these cordless drills.

Dewalt DCD996P2 20-volt lithium-ion Cordless Drill

  • Comes with 2 lithium-ion batteries and a side handle
  • 3-mode LED light with spotlight mode
  • Fast drilling in masonry materials
  • Brushless motor delivers up to 57% more run time over brushed motor

Milwaukee 2704-22 M18 fuel Cordless Drill

  • This product is easy to use
  • It is effortless to handle
  • Highly durable product
  • Components included are power drills, hammer drills, and power hammer drills 

Can I use a Cordless Drill in the Rain?

No, we are afraid that you cannot use a cordless drill in the rain. We have found out that none of the brands that manufacture cordless drills give a guarantee on this. The battery of the drill might get damaged or it may get a short circuit if you use it in the rain. So, for your own safety, we would suggest you to avoid using it in the rain. 


This ends our article on the top 10 most asked questions about cordless drills. We hope these questions answered most of your queries regarding cordless drills. Furthermore, we expect that now you will be able to use cordless drills easily and safely. Do let us know about your feedback. 

You Might Be Interested In...

Leave a Comment

Your email address will not be published. Required fields are marked *