How to Use a Laser Level? – Complete Step by Step Guide for Beginners (Upd. 2020)

Using a laser level can be a bit tricky, especially if it’s your first time. Laser levels offer several options for you to choose from. They allow you to perform different sorts of construction and home improvement projects.

If you’re wondering on how to tackle your project using a laser level, then the below mentioned steps might prove to be of some help to you.

How to Use a Laser Level

Step 1: Set up the Laser Level

The first step that you have to do after taking the laser level out of its case is to set it up on a tripod stand. Incase you do not have a tripod stand, you can place it on a flat surface. Not all laser levels come with a tripod stand. So, if you wish to have one, then you might have to buy it separately. 

Step 2: Adjust the Screws

Before you turn on the laser level, you have to make sure that the device is properly adjusted. If you have a manual level, then you must ensure that the bubble vials show level. You will find some screws near the vial. Adjust them until the bubble vials show level.

Step 3: Turn it on 

After you have set the laser level on a stand and made all the adjustments, you will have to turn on the laser level. This can be done by simply pressing the power button on the device.

Step 4: Allow it to Self-level

If your laser level is a self-leveling model, the you should allow it to self-level itself. However, it is significant to notice that not all laser-levels come with a self-leveling feature. 

Step 5: Catch the Laser

After the device has been self-leveled, the unit will emit a laser. This laser will show level either on a wall ot across an outdoor workspace. The laser level could be either a dot, multiple line or a rotary laser showing level at 360 degrees. Depending on the laser level, the laser could be projected horizontally or vertically.

Now what you really have to do is catch the laser. Incase there is no wall to catch the laser, you can use a laser detector. The laser detector will help you to intercept the laser. If you are working outdoors then a laser detector might be necessary. However, for indoor use, it is not obligatory.

Step 6: Connect the Detector

The next step would require you to connect the detector to a measuring rod.

Step 7: Adjust the Detector

After connecting the detector, you will have to adjust the detector. You can do so by moving the rod of the detector up and down until you hear beeping. The beeping sound indicates that the detector has found the laser.

Step 8: Note down Measurements 

The level has been found. What to do now? You can then secure the detector to the rod. Afterwards, you can make measurements as necessary.

Conclusion

How to Use a Laser Level

If you have never used a laser level before or feel like it is a complex tool to use, then these simple steps might help you to use it easily and safely. Laser levels are a good option for helping you in construction like projects, both outdoors and indoors. Different models come with contrasting features. But, the method of using them is almost the same.

We hope this article proved to be quite helpful to you. Do give us your feedback and let us know if we missed something.

You Might Be Interested In...

Leave a Comment

Your email address will not be published. Required fields are marked *